Description
The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DPM is configurable for passive and bi-amp operation and 2 or 4 surround channels (5.1 or 7.1).
Features
- Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
- HDMI input/output for non-sync sources (DPM 100H)
- Dolby Digital Plus™ and DTS-HD® (DPM 100H)
- Control and monitoring via Ethernet including full SNMP support
- Serial automation control via RS-232
- Analog Inputs for film processors, non-sync and Mic/Line
- Master volume and full 1/3 Octave Graphic EQ on all channels (except subwoofer)
- Booth Monitor loudspeaker and headphone jack
- Digital Loudspeaker Crossovers — three passive or bi-amp screen channels
- Compatible with all existing DCA amplifiers — thousands of DCA-equipped screens are ready for full network monitoring and control
- Bypass mode routes audio around failed components to insure that the show will go on
- Intrinsic Correction™ for DCS loudspeakers for optimal “out of box” performance and reduced set-up time
- Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
Digital Signal Processing
The DPM 100 digital signal processing capability outperforms traditional analog crossovers and equalizers for optimized speaker performance. Crossover frequency, 1/3 octave graphic EQ, parametric equalization, polarity, delay and gain can be precisely adjusted for each speaker in your system. Passive or active 2-way crossovers are available for three screen channels. QSC’s proprietary Intrinsic Correction adjusts for the intrinsic behaviors of loudspeakers, removing any anomalies from the equation of factors that affect measured response and, ultimately, the quality of sound. The result is optimal “out of the box” performance while minimizing on-site room tuning.
Less Wiring, Faster Set-up
The DPM 100 greatly simplifies system wiring and set-up, significantly reducing installation time and labor cost. Digital input to the DPM 100 is provided via RJ45 cables from the D-Cinema server or IMB. Connections to DCA amplifiers for input and monitor signals are made through QSC DataPort VGA-style cables. Set-up is accomplished by a front panel USB cable connection, using a menu-driven, PC-based software program for configuration. The program includes a speaker data file that lists default parameters for popular QSC cinema speaker models.
Advanced Monitor Functions
In addition to audio monitoring of amplifier inputs and outputs, DPM 100 includes QSC’s exclusive “load fault” detection. It monitors all amplifier outputs and indicates any opens and shorts in the loudspeakers, providing confirmation that all amplifier outputs are functioning properly.
Specifications
Model | DPM 100 / 100H |
Dimensions & Accessories | |
Dimensions (HxWxD) | 3.5″(2 RU) x 19″ x 15″ |
Line voltage requirements | 100 VAC – 240 VAC, 50/60 Hz |
Accessories included | 6 ft UL/CSA line cord, Connector Kit |
Front Panel Controls and Indicators | |
Monitor Volume/parameter adjust | Rotary encoder |
LCD | 128 x 64 bit Monochrome LCD |
Master Mute | Push buttons |
Master Volume | Rotary encoder |
USB Type B port | Config and management interface |
Monitor output | 3.5 mm TRS |
Rear Panel Connectors | |
Network RJ45 | 10/100 Mbps network management |
Automation Inputs | RJ45 – 6 contact closure inputs |
RS232 | DB-9 Serial Interface |
Channels 1-8 AES/EBU Inputs | RJ45 |
Channels 15-16 AES/EBU Inputs | RJ45 |
SPDIF Input | RCA — Stereo digital audio interface and Lt/Rt Matrix |
Analog Inputs (1-8) | DB-25 |
Line Inputs | 3.5 mm TRS — Stereo Left and Right and Lt/Rt Matrix |
Mic/Line input | XLR — Mic (+ phantom pwr) or line level |
HDMI input/output (DPM 100H) | Type A female connectors |
DataPort connectors | HD-15 (9) — QSC amplifier interface |
H.I./V.I. output | 5-pin Euro-style (x1) – common GND |
Relay outputs | 3-pin Euro-style (x2) – max 30 VDC |
Monitor Speaker | |
Speaker | 2″x 3.5″ full-range |
Audio Performance | |
A/D conversion | 24-bit delta-sigma, 48 kHz |
Frequency response | 20 Hz to 20 kHz (+- .5dB) |
Inputs/Outputs | |
Main Analog Input | |
Connector | DB25F – 8 channel |
Input stage type | Active balanced input |
Input impedance | 20k Ohms |
Max analog input level | +14.2 dBu (4.0 Vrms) |
Mic/Line Input (XLR) | |
Input Stage Type | Active balanced input |
Input Impedance | 2.2k Ohms |
Max Analog Input Level | 26 dBu |
Input gain | 0 to 60dB in 1 dB steps |
Phantom power voltage | 15V |
Stereo Line Inputs | |
Connector | 3.5mm TRS mini jack |
Input stage type | Unbalanced input |
Input impedance (4dBu sens) | > 10k Ohms |
Max analog input level (4dBu sens) | 14 dBu (4.2 Vrms) |
Input impedance (-10dBV sens) | 2.7k Ohms |
Max analog input level (-10dBV sens) | 0 dBV (1 Vrms) |
DataPort Outputs (HD15) | |
Max output level | 14 dBu |
Dynamic range (unweighted) | > 109 dB |
HI/VI Outputs | |
Connector | 5-pin Euro-style with common GND |
Output stage type | Balanced output |
Max output level | 18 dBu (adjustable) |
Monitor Headphone Output | |
Connector | Front Panel 3.5mm mini jack |
Output stage type | Unbalanced output |
Max output level | 21 dBu |
Dynamic range (unweighted) | > 109 dB |
AES/EBU Digital Inputs (RJ45) | |
Input stage type | Balanced input |
Input sample rate | 48 kHz or 96 kHz |
SPDIF Digital Inputs (Mono RCA) | |
Input stage type | Unbalanced input |
Stereo PCM or Dolby Digital Plus (DPM100H only) | |
Other | |
Relay outputs (2) | 3-pin Euro-style |
Normally open (NO), normally closed (NC), and common | |
Max 30 VDC @ 1A | |
Automation inputs (RJ45 – 6 GPI) | Max input voltage 5V (3.3V typical) |
TTL compatible dry contact closure |
- Description
-
Description
The DPM builds on the legacy of QSC’s DCM and DCP products to provide all signal processing and monitoring functions for Digital Cinema in a single integrated system. Designed to be used with QSC’s Digital Cinema Amplifiers (DCA) and featuring advanced Intrinsic Correction™ settings for QSC’s Digital Cinema Speakers (DCS), the DPM optimizes loudspeaker performance while simplifying cinema sound system wiring and configuration. The DPM is configurable for passive and bi-amp operation and 2 or 4 surround channels (5.1 or 7.1).
Features
- Ten digital inputs for 5.1 and 7.1 soundtracks and HI/VI
- HDMI input/output for non-sync sources (DPM 100H)
- Dolby Digital Plus™ and DTS-HD® (DPM 100H)
- Control and monitoring via Ethernet including full SNMP support
- Serial automation control via RS-232
- Analog Inputs for film processors, non-sync and Mic/Line
- Master volume and full 1/3 Octave Graphic EQ on all channels (except subwoofer)
- Booth Monitor loudspeaker and headphone jack
- Digital Loudspeaker Crossovers — three passive or bi-amp screen channels
- Compatible with all existing DCA amplifiers — thousands of DCA-equipped screens are ready for full network monitoring and control
- Bypass mode routes audio around failed components to insure that the show will go on
- Intrinsic Correction™ for DCS loudspeakers for optimal “out of box” performance and reduced set-up time
- Continued development of software and firmware will add new capabilities to the existing hardware with easy firmware updates
Digital Signal Processing
The DPM 100 digital signal processing capability outperforms traditional analog crossovers and equalizers for optimized speaker performance. Crossover frequency, 1/3 octave graphic EQ, parametric equalization, polarity, delay and gain can be precisely adjusted for each speaker in your system. Passive or active 2-way crossovers are available for three screen channels. QSC’s proprietary Intrinsic Correction adjusts for the intrinsic behaviors of loudspeakers, removing any anomalies from the equation of factors that affect measured response and, ultimately, the quality of sound. The result is optimal “out of the box” performance while minimizing on-site room tuning.
Less Wiring, Faster Set-up
The DPM 100 greatly simplifies system wiring and set-up, significantly reducing installation time and labor cost. Digital input to the DPM 100 is provided via RJ45 cables from the D-Cinema server or IMB. Connections to DCA amplifiers for input and monitor signals are made through QSC DataPort VGA-style cables. Set-up is accomplished by a front panel USB cable connection, using a menu-driven, PC-based software program for configuration. The program includes a speaker data file that lists default parameters for popular QSC cinema speaker models.
Advanced Monitor Functions
In addition to audio monitoring of amplifier inputs and outputs, DPM 100 includes QSC’s exclusive “load fault” detection. It monitors all amplifier outputs and indicates any opens and shorts in the loudspeakers, providing confirmation that all amplifier outputs are functioning properly.
- Specifications
-
Specifications
Model DPM 100 / 100H Dimensions & Accessories Dimensions (HxWxD) 3.5″(2 RU) x 19″ x 15″ Line voltage requirements 100 VAC – 240 VAC, 50/60 Hz Accessories included 6 ft UL/CSA line cord, Connector Kit Front Panel Controls and Indicators Monitor Volume/parameter adjust Rotary encoder LCD 128 x 64 bit Monochrome LCD Master Mute Push buttons Master Volume Rotary encoder USB Type B port Config and management interface Monitor output 3.5 mm TRS Rear Panel Connectors Network RJ45 10/100 Mbps network management Automation Inputs RJ45 – 6 contact closure inputs RS232 DB-9 Serial Interface Channels 1-8 AES/EBU Inputs RJ45 Channels 15-16 AES/EBU Inputs RJ45 SPDIF Input RCA — Stereo digital audio interface and Lt/Rt Matrix Analog Inputs (1-8) DB-25 Line Inputs 3.5 mm TRS — Stereo Left and Right and Lt/Rt Matrix Mic/Line input XLR — Mic (+ phantom pwr) or line level HDMI input/output (DPM 100H) Type A female connectors DataPort connectors HD-15 (9) — QSC amplifier interface H.I./V.I. output 5-pin Euro-style (x1) – common GND Relay outputs 3-pin Euro-style (x2) – max 30 VDC Monitor Speaker Speaker 2″x 3.5″ full-range Audio Performance A/D conversion 24-bit delta-sigma, 48 kHz Frequency response 20 Hz to 20 kHz (+- .5dB) Inputs/Outputs Main Analog Input Connector DB25F – 8 channel Input stage type Active balanced input Input impedance 20k Ohms Max analog input level +14.2 dBu (4.0 Vrms) Mic/Line Input (XLR) Input Stage Type Active balanced input Input Impedance 2.2k Ohms Max Analog Input Level 26 dBu Input gain 0 to 60dB in 1 dB steps Phantom power voltage 15V Stereo Line Inputs Connector 3.5mm TRS mini jack Input stage type Unbalanced input Input impedance (4dBu sens) > 10k Ohms Max analog input level (4dBu sens) 14 dBu (4.2 Vrms) Input impedance (-10dBV sens) 2.7k Ohms Max analog input level (-10dBV sens) 0 dBV (1 Vrms) DataPort Outputs (HD15) Max output level 14 dBu Dynamic range (unweighted) > 109 dB HI/VI Outputs Connector 5-pin Euro-style with common GND Output stage type Balanced output Max output level 18 dBu (adjustable) Monitor Headphone Output Connector Front Panel 3.5mm mini jack Output stage type Unbalanced output Max output level 21 dBu Dynamic range (unweighted) > 109 dB AES/EBU Digital Inputs (RJ45) Input stage type Balanced input Input sample rate 48 kHz or 96 kHz SPDIF Digital Inputs (Mono RCA) Input stage type Unbalanced input Stereo PCM or Dolby Digital Plus (DPM100H only) Other Relay outputs (2) 3-pin Euro-style Normally open (NO), normally closed (NC), and common Max 30 VDC @ 1A Automation inputs (RJ45 – 6 GPI) Max input voltage 5V (3.3V typical) TTL compatible dry contact closure