Description
The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface. The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is possible that a BLU-10 could replace a more expensive proprietary touch screen solution where simpler control interfacing is required.
As with the Soundweb 9010, up to 100 control ‘pages’ of virtually any Soundweb London DSP parameter can be constructed, with the ability to create ‘folders’ for nested pages. Access to specific pages or folders can be restricted with the use of password protection, so that only engineers or key employees can adjust critical system parameters.
Each page can hold up to eight different functions and with navigation being carried out entirely by a page list, all of these functions can be assigned to real parameters rather than functioning as page transitions.
More Details
PROGRAMMING THE BLU-10
Soundweb users will be familiar with the simple drag-and-drop programming interface, and the BLU-10 interface is very similar. Once the menu pages have been created, operation of the pages can be tested using the special simulation mode, which emulates how the controller will work when in use. This allows menu structures to be checked before the system goes live.
The BLU-10 connects into a Soundweb London network via its Ethernet port, either directly into the rear of a rackmount device such as the BLU-16 with a Cat 5 crossover cable or with a standard Cat 5 cable into an Ethernet switch. The unit is powered either using the terminals on the rear, accepting a range of 12V – 48V DC or with IEEE802.3af Power Over Ethernet (POE).
MECHANICAL INSTALLATION
The BLU-10 mounts in a standard US 3-gang wallbox (available from BSS Audio) using the screws provided with the unit.
Specifications
Chassis | 3-Gang US |
Control In | Ethernet |
Display | Touch Screen |
Power Over Ethernet (PoE) | yes |
Config | Software |
Controls | two buttons, rotary encoder, touch-screen |
Manuals & Downloads
The latest owner’s manuals, quick start guides, and documents.
BLU-10BLU CAD drawing front | 68.7 KB |
BLU-10BLU CAD drawing rear | 46.5 KB |
BLU-10BLU Cut Sheet-English | 160 KB |
BLU10_top_dxf.zip | 43.5 KB |
BSS_AESpecs.pdf | 73 KB |
Brochures | |
Soundweb London Family Brochure | 1.3 MB |
Software | |
HiQnet London Architect | 117 MB |
Data Sheets | |
Soundweb London A&E Specs | 73 KB |
Install Guides | |
BLU-10 Install Guide-English | 307 KB |
- Description
-
Description
The original Soundweb 9010 Programmable Controller set new standards in control interfacing to DSP systems, and has yet to be bettered as a simple yet powerful interface. The Soundweb London equivalent, the BLU-10, builds on that power and reputation by adding touch-screen control to make a more attractive and potentially cost-saving control solution. It is possible that a BLU-10 could replace a more expensive proprietary touch screen solution where simpler control interfacing is required.
As with the Soundweb 9010, up to 100 control ‘pages’ of virtually any Soundweb London DSP parameter can be constructed, with the ability to create ‘folders’ for nested pages. Access to specific pages or folders can be restricted with the use of password protection, so that only engineers or key employees can adjust critical system parameters.
Each page can hold up to eight different functions and with navigation being carried out entirely by a page list, all of these functions can be assigned to real parameters rather than functioning as page transitions.
More Details
PROGRAMMING THE BLU-10
Soundweb users will be familiar with the simple drag-and-drop programming interface, and the BLU-10 interface is very similar. Once the menu pages have been created, operation of the pages can be tested using the special simulation mode, which emulates how the controller will work when in use. This allows menu structures to be checked before the system goes live.
The BLU-10 connects into a Soundweb London network via its Ethernet port, either directly into the rear of a rackmount device such as the BLU-16 with a Cat 5 crossover cable or with a standard Cat 5 cable into an Ethernet switch. The unit is powered either using the terminals on the rear, accepting a range of 12V – 48V DC or with IEEE802.3af Power Over Ethernet (POE).
MECHANICAL INSTALLATION
The BLU-10 mounts in a standard US 3-gang wallbox (available from BSS Audio) using the screws provided with the unit.
- Specifications
-
Specifications
Chassis 3-Gang US Control In Ethernet Display Touch Screen Power Over Ethernet (PoE) yes Config Software Controls two buttons, rotary encoder, touch-screen - Manuals & Downloads
-
Manuals & Downloads
The latest owner’s manuals, quick start guides, and documents.
BLU-10BLU CAD drawing front 68.7 KB BLU-10BLU CAD drawing rear 46.5 KB BLU-10BLU Cut Sheet-English 160 KB BLU10_top_dxf.zip 43.5 KB BSS_AESpecs.pdf 73 KB Brochures Soundweb London Family Brochure 1.3 MB Software HiQnet London Architect 117 MB Data Sheets Soundweb London A&E Specs 73 KB Install Guides BLU-10 Install Guide-English 307 KB